PROTOTYPE
PCB ASSEMBLY

STARTING AT $95

  • BGA, QFN & Leadless
  • SMT & Thru Hole
  • Lead or Lead Free Assembly
  • Single & Double Sided Boards
PCB Assembly
$0.00
PCB Fabrication
$0.00
Subtotal
$0.00

PROTOTYPE PCB ASSEMBLY

GET A PCB
ASSEMBLY QUOTE

  • Using the information in your BOM fill out the quote form and click on the calculate button.
    • You can quote up to four board quantities at once.
    • Your circuit boards do not have to be panelized.
    • No NRE or minimums
    • 0201's are not supported with this promotional product. You need a regular PCB assembly quote.
  • A price table showing labor cost will appear. Select a unit price and lead time combination from the price table.
  • Make sure that the Zip file that you are uploading contains the BOM and centroid (pick and place) file for your project.




PROTOTYPE PCB FABRICATION

Get a PCB Fabrication Quote

  • Fill out the quote form with your board specs and click on the calculate button.
  • A price table will appear. Select a unit price/lead time combination from the price table.
  • Make sure that the Zip file that you are uploading contains the Gerbers for your project.

US QuickTurn PCB Standard Specs

Material Type: FR4 Tg135 or Tg170 Min. Trace Space: 0.005 inches
Finish Thickness: 0.062 Copper Weight: 1 oz Outer / 1 oz Inner
Solder Mask Sides: Both Sides Solder Mask Color: Green
Silk-Screen Color: White


PCB PARTS (ELECTRONIC COMPONENTS)

Choose this option if you want us to purchase the parts required for your assembly.
We will e-mail a quote to you once we have sourced all the parts needed (including extras) for this project.

PCB Assembly Express can assemble your PCB using SMT parts in a wide variety of packages including cut tape, reels, tubes, trays, & continuous tape.
Please ship your PCB parts kit to our location in Portland, Oregon:

PCB Assembly Express
Attention: Receiving - XXXXXX [Replace with your Order Number]
10170 SW Nimbus Avenue, Suite H1
Portland, OR, 97223

PCB PARTS & KIT REQUIREMENTS

  1. PCB Assembly Express will require extra components for assembly attrition as follows:
    • Discrete SMT passives:
      ⇢ 0402 size: 20% extra, subject to a minimum of 70 extra.
      ⇢ 0603 size: 10% extra, subject to a minimum of 50 extra.
      ⇢ 0805 size: 10% extra, subject to a minimum of 20 extra.
      ⇢ 1206 or larger size: 10% extra, subject to a minimum of 10 extra.
    • Active Devices:
      ⇢ 10% extra for devices costing < $5.00 each, subject to a minimum of 3 extra.
      ⇢ 2% extra for devices costing > $5.00 each, subject to a minimum of 1 extra.
  2. Insufficient attrition would be construed as parts shortage (we will not start the job).
  3. All SMT components must be in reels / continuous tapes (minimum 6" long) / tubes / or trays (or we don't start the job).
  4. All consigned parts must be shipped to us in a properly kitted form (each line item of BOM in a separate bag, properly marked for identifying the component).
  5. All extra / leftover parts will be re-bagged and sent back with the finished assemblies.